Flexible Verpackung für Gelee-Becher, Pudding und Joghurt
Flexible Verpackung für Gelee-Becher, Pudding und Joghurt
Flexible Verpackung für Gelee-Becher, Pudding und Joghurt - Konstruktionsdetail
Flexible Verpackung für Gelee-Becher, Pudding und Joghurt - VerpackungsanwendungFlexible Verpackung für Gelee-Becher, Pudding und Joghurt - Verpackungsanwendung
Printed lychee jelly stand-up zipper pouch sample Flexible Verpackung für Gelee-Becher, Pudding und Joghurt - Verpackungsanwendung →
Empfohlene Verpackungsarten
- Easy peel sealing film (lidding film for jelly cups, pudding cups and yogurt cups; consistent peel strength with no residue after opening). Spout pouches (integrated spout and cap for jelly drinks and squeezable jelly products; leak-resistant spout welding). Food packaging roll film (laminated roll film for automatic jelly cup or stick pack sealing lines). Three side seal pouch (cost-effective single-serve sachet format for jelly portion packs). Retort pouches (retort-grade structures for shelf-stable jelly products requiring high-temperature sterilization). The lidding film seal layer must be compatible with the cup material (PP, PS or PET).
- PET/PE (standard easy peel lidding film for jelly and pudding cups; good print surface and consistent peel strength). PET/CPP (higher heat resistance for hot-fill jelly products; customizable peel force). PET/VMPET/PE (metallic barrier layer for light-sensitive jelly or dairy products). Retort-ready structures (for shelf-stable jelly requiring sterilization). Cup material and sealing temperature must be confirmed before production because the seal layer must match the cup rim material. Final structure confirmed based on cup material, sealing temperature, peel force target, filling condition and shelf life requirements.
- Common Packaging Problems — Peel force too strong (difficult to open) or too weak (premature opening during transport). Residue after peeling affecting consumer experience. Poor sealing between lidding film and cup material causing leakage. Film curling during storage or sealing affecting machine performance. Unsuitable sealing temperature window for the production line speed. Cup rim contamination before sealing causing weak seal spots.
- Each batch undergoes peel strength test (4-12 N/15mm typical range depending on product), sealing temperature test with actual cup material, leakage test (vacuum or pressure method), cup compatibility verification, film flatness inspection, roll width tolerance check, heat resistance test if hot-fill or retort is required and visual appearance inspection. Pre-shipment inspection with retained batch samples. Sample testing with actual cups and sealing machine recommended before bulk production. ISO22000 certified production.
- Cup material (PP/PS/PET) and rim diameter or film width, sealing temperature range, target peel force requirement, jelly product type and filling condition (ambient/hot fill/chilled), sterilization requirement, roll width and core size if roll film, printing colors and artwork file, estimated order quantity, shelf life requirement, target market or China OEM handover requirement.
- Easy Peel Sealing Film, Food Packaging Roll Film, Spout Pouches, Three Side Seal Pouch, Retort Pouches.
- Q: What information is needed for jelly cup sealing film quotation? A: Buyers should provide cup material, cup diameter or film width, sealing temperature, peel force requirement, filling condition, sterilization requirement, order quantity and artwork. Q: Why is peel force important for jelly cup lidding film? A: Peel force that is too strong makes opening difficult for consumers. Too weak may cause premature opening during transport. The peel force should be confirmed according to the product and packaging line. Q: Can the same lidding film be used for different cup materials? A: No. The seal layer must be compatible with the cup rim material. PP, PS and PET cups require different seal layer formulations.
Materialvorschläge
Material direction must be matched to the actual product or formulation, target market, filling or packing equipment, storage and distribution conditions, with the complete component set, specimen, method, conditions and acceptance owner recorded. Photographed appearance, a similar project or a generic material name does not replace a project specification, compatibility testing and finished-pack release.
Qualitätskontrollpunkte
Quality items, specimens, methods, conditions, sample size, frequency and acceptance criteria must be agreed in the project specification. A factory image, general workflow or single test does not prove an untested structure, filled package, batch, shelf life or production performance.
Checkliste zur Angebotsvorbereitung
- Produkttyp
- Größe / Abmessungen
- Materialstruktur / Dicke
- Druckfarben
- Menge
- Verpackungsmaschinentyp
- Haltbarkeit und Lagerbedingungen
- Zielmarkt und Compliance-Anforderungen
Verwandte Produkte
Häufig gestellte Fragen
Wie starte ich eine individuelle Verpackungsbestellung bei Huasheng Packaging?
Senden Sie uns Ihren Produkttyp, die gewünschte Beutelgröße, das bevorzugte Material, die Design-Datei und die geschätzte Menge. Unser Vertriebsteam prüft die eingereichten Angaben und bestätigt den nächsten Projektschritt. Danach folgen Design-Bestätigung, erforderliche Musterfreigabe und Abstimmung der Produktionsbedingungen.
Welche Informationen muss ich für eine Angebotsanfrage bereitstellen?
Bitte vorbereiten: Produkttyp (z. B. Kaffeebohnen, Chips, Soße), erwartete Beutelgröße (Breite × Länge), Materialpräferenz falls bekannt, Druckdesign-Datei oder Farbanforderungen, geschätzte Bestellmenge und besondere Anforderungen wie Zipper, Ventil, Ausgießer oder Aufreißkerbe.
Können Sie mein Logo und individuelles Design auf die Verpackung drucken?
Ja. Wir unterstützen bis zu 9-Farben-Tiefdruck für individuelle Logos und Designs. Sie können Ihre Design-Dateien in den Formaten AI, PDF, PSD oder CDR bereitstellen. Unser Prepress-Team prüft die Datei und bestätigt die Druckbarkeit vor der Produktion.
What artwork file format should I send?
We accept Adobe Illustrator (AI), PDF, PSD, and CDR files. Please use CMYK color mode with at least 300 dpi resolution. Include 3 mm bleed if your design extends to the edge. Please provide print-ready artwork where possible; if the file is not complete, we can check technical print requirements before production.