Chips Packaging Solutions for Crispy Snacks
Custom chips packaging and crispy snack packaging solutions, including snack roll film, stand up pouches, material structures, sealing performance and automatic packing machine support.
Chips Packaging Solutions for Crispy Snacksคำแนะนำวัสดุ
Material recommendations by product type: dry products typically use PET/PE or BOPP/CPP; oily or high-aroma products benefit from PET/VMPET/PE or PET/AL/PE for better barrier; liquids and sauces need NY/PE or PET/AL/PE for chemical resistance and leak-proof sealing; frozen products use cold-resistant PE layer; high-temperature sterilization uses PET/AL/CPP or PET/AL/PA/CPP retort-grade structures. Huasheng Packaging recommends suitable structures based on product type and shelf life requirements.
จุดควบคุมคุณภาพ
Each batch undergoes: print color consistency check, lamination bond strength test, heat seal strength test, dimensional tolerance measurement, visual inspection. Application-level: puncture resistance, chemical resistance, moisture barrier, cold impact resistance, seal integrity (leak/burst). Pre-shipment inspection with retained samples.
รายการเตรียมการก่อนสอบถาม
- ประเภทผลิตภัณฑ์
- ขนาด
- โครงสร้างวัสดุ / ความหนา
- จำนวนสีพิมพ์
- จำนวน
- ประเภทเครื่องบรรจุ
- อายุสินค้าและเงื่อนไขการจัดเก็บ
- ตลาดเป้าหมายและข้อกำหนดด้านการปฏิบัติตาม
ผลิตภัณฑ์ที่เกี่ยวข้อง
คำถามที่พบบ่อย
จะเริ่มสั่งบรรจุภัณฑ์แบบกำหนดเองกับ Huasheng Packaging ได้อย่างไร?
ส่งประเภทสินค้า ขนาดซองที่ต้องการ วัสดุที่ชอบ ไฟล์ออกแบบ และปริมาณโดยประมาณมาให้เรา ทีมขายของเราจะตรวจสอบความต้องการของคุณและเสนอราคาภายใน 24 ชั่วโมงในวันทำการ จากนั้นเราจะดำเนินการยืนยันแบบ อนุมัติตัวอย่าง และผลิต
ต้องให้ข้อมูลอะไรบ้างเมื่อขอใบเสนอราคา?
กรุณาเตรียม: ประเภทสินค้า (เช่น เมล็ดกาแฟ มันฝรั่งทอด ซอส) ขนาดซองที่คาดหวัง (กว้าง × ยาว) ความชอบวัสดุถ้าทราบ ไฟล์ออกแบบพิมพ์หรือข้อกำหนดสี ปริมารสั่งซื้อโดยประมาณ และข้อกำหนดพิเศษ เช่น ซิป วาล์ว หูเท หรือรอยฉีก
พิมพ์โลโก้และดีไซน์แบบกำหนดเองของฉันบนบรรจุภัณฑ์ได้ไหม?
ได้ เรารองรับการพิมพ์กราเวียร์สูงสุด 9 สีสำหรับโลโก้และดีไซน์แบบกำหนดเอง คุณสามารถส่งไฟล์ออกแบบในรูปแบบ AI, PDF, PSD หรือ CDR ทีมก่อนพิมพ์ของเราจะตรวจสอบไฟล์และยืนยันความเป็นไปได้ในการพิมพ์ก่อนการผลิต
What artwork file format should I send?
We accept Adobe Illustrator (AI), PDF, PSD, and CDR files. Please use CMYK color mode with at least 300 dpi resolution. Include 3 mm bleed if your design extends to the edge. Please provide print-ready artwork where possible; if the file is not complete, we can check technical print requirements before production.