منجمد خوراک پیکیجنگ سلوشنز
منجمد سبزیوں، گوشت، سمندری غذا اور تیار شدہ کھانے کے لیے حسب ضرورت منجمد خوراک پیکیجنگ رول فلم اور پاؤچز مضبوط سیلنگ اور نمی بیریئر کے ساتھ۔
منجمد خوراک پیکیجنگ سلوشنز
منجمد خوراک پیکیجنگ سلوشنز - ساخت کی تفصیل
منجمد خوراک پیکیجنگ سلوشنز - پیکیجنگ استعمالمنجمد خوراک پیکیجنگ سلوشنز - پیکیجنگ استعمال
تیار کھانے کا پرنٹ شدہ پاؤچ 500 gمنجمد خوراک پیکیجنگ سلوشنز - پیکیجنگ استعمال →
منجمد خوراک کی پیکیجنگ کے مواد کے اختیارات
Recommended material structures for frozen food packaging: NY/PE offers excellent low-temperature toughness and puncture resistance, suitable for frozen meat, seafood and vegetables; PET/PE provides good printing surface and sealing strength for general frozen products; PET/AL/PE is suitable for long-shelf-life frozen products requiring moisture and oxidation protection; BOPP/CPP works for lightweight frozen snacks. The frozen-grade PE layer should maintain performance at -18C to -40C without brittleness. Thickness typically recommended at 80-120 microns depending on product weight, shape and transport conditions.
منجمد خوراک کے لیے تجویز کردہ پیکیجنگ اقسام
- Food Packaging Roll Film — for VFFS/HFFS automatic packing of frozen vegetables, fruit and seafood
- Three Side Seal Pouches — for frozen single-serve portions and snacks
- Stand Up Zipper Pouches — for retail display of frozen fruit, vegetables and snacks
- Retort Pouches — for frozen ready meals requiring sterilization before freezing
منجمد خوراک کی پیکیجنگ کے لیے کوالٹی کنٹرول پوائنٹس
Quality control points for frozen food packaging: low-temperature heat seal strength testing (at -18C), frozen-state drop testing, puncture resistance testing (simulating sharp edges of frozen products), moisture barrier testing (WVTR), seal integrity testing (dye penetration method), cold impact testing (rapid temperature change from ambient to -40C). Retained samples from each production batch for traceability.
انکوائری سے پہلے کیا تیار کریں
- Product type and freezing temperature range
- Bag size or roll film width
- Whether puncture-resistant structure is needed
- Shelf life and storage conditions
- Packing machine type (VFFS/HFFS/manual)
- Estimated order quantity
- Printing colors and artwork file
- Target market or China OEM handover requirement
مواد کی تجاویز
Material recommendations by product type: dry products typically use PET/PE or BOPP/CPP; oily or high-aroma products benefit from PET/VMPET/PE or PET/AL/PE for better barrier; liquids and sauces need NY/PE or PET/AL/PE for chemical resistance and leak-proof sealing; frozen products use cold-resistant PE layer; high-temperature sterilization uses PET/AL/CPP or PET/AL/PA/CPP retort-grade structures. Huasheng Packaging recommends suitable structures based on product type and shelf life requirements.
کوالٹی کنٹرول پوائنٹس
Each batch undergoes: print color consistency check, lamination bond strength test, heat seal strength test, dimensional tolerance measurement, visual inspection. Application-level: puncture resistance, chemical resistance, moisture barrier, cold impact resistance, seal integrity (leak/burst). Pre-shipment inspection with retained samples.
انکوائری تیاری کی چیک لسٹ
- مصنوعات کی قسم
- سائز / ابعاد
- مواد کی ساخت / موٹائی
- پرنٹنگ رنگ
- مقدار
- پیکنگ مشین کی قسم
- شیلف لائف اور اسٹوریج کی ضروریات
- ہدف مارکیٹ اور تعمیل کی ضروریات
متعلقہ مصنوعات
Related Packaging Guides
اکثر پوچھے جانے والے سوالات
میں Huasheng Packaging کے ساتھ حسب ضرورت پیکیجنگ آرڈر کیسے شروع کروں؟
ہمیں اپنی پروڈکٹ کی قسم، ہدف بیگ کا سائز، ترجیحی مواد، آرٹ ورک فائل، اور تخمینی مقدار بھیجیں۔ ہماری سیلز ٹیم آپ کی ضروریات کا جائزہ لے گی اور کاروباری دنوں میں 24 گھنٹے کے اندر کوٹیشن فراہم کرے گی۔ اس کے بعد ہم آرٹ ورک کی تصدیق، نمونے کی منظوری اور پیداوار کی طرف بڑھتے ہیں۔
کوئیٹیشن کی درخواست کرتے وقت مجھے کون سی معلومات فراہم کرنی چاہیے؟
براہ کرم تیار کریں: پروڈکٹ کی قسم (جیسے کافی بینز، چپس، ساس)، متوقع بیگ کا سائز (چوڑائی × لمبائی)، مواد کی ترجیح اگر معلوم ہو، پرنٹنگ ڈیزائن فائل یا رنگ کی ضروریات، تخمینی آرڈر کی مقدار، اور کوئی خاص ضروریات جیسے زپر، والو، اسپاؤٹ، یا ٹیئر نوچ۔
کیا آپ پیکیجنگ پر میرا لوگو اور حسب ضرورت ڈیزائن پرنٹ کر سکتے ہیں؟
جی ہاں۔ ہم حسب ضرورت لوگو اور ڈیزائن کے لیے 9 رنگوں تک کی روٹوگریوور پرنٹنگ کو سپورٹ کرتے ہیں۔ آپ AI، PDF، PSD، یا CDR فارمیٹ میں اپنی آرٹ ورک فائلیں فراہم کر سکتے ہیں۔ ہماری پری پریس ٹیم پیداوار سے پہلے فائل چیک کرے گی اور پرنٹ کی فزیبلٹی کی تصدیق کرے گی۔
What artwork file format should I send?
We accept Adobe Illustrator (AI), PDF, PSD, and CDR files. Please use CMYK color mode with at least 300 dpi resolution. Include 3 mm bleed if your design extends to the edge. Please provide print-ready artwork where possible; if the file is not complete, we can check technical print requirements before production.