Chips Packaging Solutions for Crispy Snacks
Custom chips packaging and crispy snack packaging solutions, including snack roll film, stand up pouches, material structures, sealing performance and automatic packing machine support.
Chips Packaging Solutions for Crispy Snacksसामग्री सुझाव
Material recommendations by product type: dry products typically use PET/PE or BOPP/CPP; oily or high-aroma products benefit from PET/VMPET/PE or PET/AL/PE for better barrier; liquids and sauces need NY/PE or PET/AL/PE for chemical resistance and leak-proof sealing; frozen products use cold-resistant PE layer; high-temperature sterilization uses PET/AL/CPP or PET/AL/PA/CPP retort-grade structures. Huasheng Packaging recommends suitable structures based on product type and shelf life requirements.
गुणवत्ता नियंत्रण बिंदु
Each batch undergoes: print color consistency check, lamination bond strength test, heat seal strength test, dimensional tolerance measurement, visual inspection. Application-level: puncture resistance, chemical resistance, moisture barrier, cold impact resistance, seal integrity (leak/burst). Pre-shipment inspection with retained samples.
पूछताछ तैयारी चेकलिस्ट
- उत्पाद प्रकार
- आकार / आयाम
- सामग्री संरचना / मोटाई
- प्रिंटिंग रंग
- मात्रा
- पैकिंग मशीन प्रकार
- शेल्फ लाइफ और भंडारण आवश्यकताएं
- लक्षित बाजार और अनुपालन आवश्यकताएं
संबंधित उत्पाद
अक्सर पूछे जाने वाले प्रश्न
मैं Huasheng Packaging के साथ कस्टम पैकेजिंग ऑर्डर कैसे शुरू करूं?
हमें अपना उत्पाद प्रकार, लक्षित बैग आकार, पसंदीदा सामग्री, आर्टवर्क फ़ाइल और अनुमानित मात्रा भेजें। हमारी बिक्री टीम आपकी आवश्यकताओं की समीक्षा करेगी और कार्य दिवसों पर 24 घंटे के भीतर कोटेशन प्रदान करेगी। इसके बाद हम डिज़ाइन पुष्टि, नमूना अनुमोदन और उत्पादन की ओर बढ़ते हैं।
कोटेशन का अनुरोध करते समय मुझे क्या जानकारी देनी चाहिए?
कृपया तैयार करें: उत्पाद प्रकार (जैसे कॉफी बीन्स, चिप्स, सॉस), अपेक्षित बैग आकार (चौड़ाई × लंबाई), सामग्री वरीयता यदि ज्ञात हो, प्रिंटिंग डिज़ाइन फ़ाइल या रंग आवश्यकताएं, अनुमानित ऑर्डर मात्रा, और कोई विशेष आवश्यकताएं जैसे ज़िपर, वाल्व, स्पाउट या टियर नॉच।
क्या आप पैकेजिंग पर मेरा लोगो और कस्टम डिज़ाइन प्रिंट कर सकते हैं?
हां। हम कस्टम लोगो और डिज़ाइन के लिए 9-रंग तक की रोटोग्रेव्योर प्रिंटिंग का समर्थन करते हैं। आप AI, PDF, PSD या CDR प्रारूप में अपनी आर्टवर्क फ़ाइलें प्रदान कर सकते हैं। हमारी प्री-प्रेस टीम फ़ाइल की जांच करेगी और उत्पादन से पहले प्रिंट व्यवहार्यता की पुष्टि करेगी।
What artwork file format should I send?
We accept Adobe Illustrator (AI), PDF, PSD, and CDR files. Please use CMYK color mode with at least 300 dpi resolution. Include 3 mm bleed if your design extends to the edge. Please provide print-ready artwork where possible; if the file is not complete, we can check technical print requirements before production.