Material recommendations by product type: dry products typically use PET/PE or BOPP/CPP; oily or high-aroma products benefit from PET/VMPET/PE or PET/AL/PE for better barrier; liquids and sauces need NY/PE or PET/AL/PE for chemical resistance and leak-proof sealing; frozen products use cold-resistant PE layer; high-temperature sterilization uses PET/AL/CPP or PET/AL/PA/CPP retort-grade structures. Huasheng Packaging recommends suitable structures based on product type and shelf life requirements.
Each batch undergoes: print color consistency check, lamination bond strength test, heat seal strength test, dimensional tolerance measurement, visual inspection. Application-level: puncture resistance, chemical resistance, moisture barrier, cold impact resistance, seal integrity (leak/burst). Pre-shipment inspection with retained samples.
Are flat bottom pouches or stand-up pouches better for pet food?
Both are widely used. Flat bottom pouches offer excellent shelf stability for heavier weights. Stand-up zipper pouches provide consumer convenience. The choice depends on filling weight, shelf display and zipper needs.
Do I need high-barrier materials for pet food?
Pet food containing oils and fats benefits from high-barrier structures like PET/VMPET/PE or PET/AL/PE. The barrier level should match the product fat content and target shelf life.
Can a zipper be added to pet food bags?
Yes, resealable zippers can be added to both flat bottom and stand-up pouches. Zipper durability is tested for repeated open/close cycles to support consumer use.
What should I consider for larger weight pet food bags?
For bags above 2kg, confirm material stiffness, bottom gusset design, seal strength and load-bearing capacity. Drop testing and transport simulation are recommended.
Apa yang harus saya siapkan sebelum meminta penawaran?
Jenis produk, berat isi, dimensi target, preferensi material, warna cetak, file artwork, perkiraan jumlah, target umur simpan, negara tujuan.
Bagaimana cara memulai pesanan kemasan kustom dengan Huasheng Packaging?
Kirimkan jenis produk, ukuran kemasan yang diinginkan, bahan pilihan, file desain, dan perkiraan jumlah kepada kami. Tim penjualan kami akan meninjau kebutuhan Anda dan memberikan penawaran dalam 24 jam pada hari kerja. Setelah itu, kami melanjutkan ke konfirmasi desain, persetujuan sampel, dan produksi.
Informasi apa yang harus saya berikan saat meminta penawaran?
Harap siapkan: jenis produk (misalnya biji kopi, keripik, saus), ukuran kemasan yang diharapkan (lebar × panjang), preferensi bahan jika diketahui, file desain cetak atau persyaratan warna, perkiraan jumlah pesanan, dan persyaratan khusus seperti zipper, valve, spout, atau tear notch.
Bisakah Anda mencetak logo dan desain kustom saya pada kemasan?
Ya. Kami mendukung hingga 9 warna rotogravure untuk logo dan desain kustom. Anda dapat memberikan file desain dalam format AI, PDF, PSD, atau CDR. Tim pra-cetak kami akan memeriksa file dan mengkonfirmasi kelayakan cetak sebelum produksi.
What artwork file format should I send?
We accept Adobe Illustrator (AI), PDF, PSD, and CDR files. Please use CMYK color mode with at least 300 dpi resolution. Include 3 mm bleed if your design extends to the edge. Please provide print-ready artwork where possible; if the file is not complete, we can check technical print requirements before production.
